Rtp Settings - Cisco TelePresence MX200 G2 Administrator's Manual

Cisco TelePresence MX200 G2 and MX300 G2
Contents

RTP settings

RTP Ports Range Start
Specify the first port in the range of RTP ports.
As default, the system is using the UDP ports in the range 2326 to 2487 for RTP and RTCP
media data. Each media channel is using two adjacent ports for RTP and RTCP. The default
number of ports required in the UDP port range is based on the number of simultaneous calls
that the endpoint is capable of.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Value space: <1024..65438>
Range: Select a value from 1024 to 65438.
RTP Ports Range Start: 2326
Example:
RTP Ports Range Stop
Specify the last RTP port in the range.
As default, the system is using the UDP ports in the range 2326 to 2487 for RTP and RTCP
media data. Each media channel is using two adjacent ports for RTP and RTCP. The default
number of ports required in the UDP port range is based on the number of simultaneous calls
that the endpoint is capable of.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Value space: <1120..65535>
Range: Select a value from 1120 to 65535.
RTP Ports Range Stop: 2486
Example:
D15078.04 MX200 G2 and MX300 G2 Administrator Guide TC7.3, DECEMBER 2014.
Introduction Web interface System settings System settings
www.cisco.com — Copyright © 2013–2014 Cisco Systems, Inc. All rights reserved.
88
Administrator Guide
Setting passwords Appendices