Communications; Figure 1-1 Telephone Line (Telco, North America Only) Or Network (Lan) - Honeywell Rapid Eye Hybrid LT Installation Manual

Camera Model Versions that
equIP HD4MWIH
equIP HCD5WIH
a
ONVIF IP Cameras
a
Some third party ONVIF IP cameras have been tested and are supported by Rapid Eye Hybrid LT V10.1 units. For a complete list
of supported IP cameras, including Honeywell cameras and ONVIF IP cameras, see the Honeywell Open Technology Alliance
web page (http://www.security.honeywell.com/hota). For more information on setting up supported ONVIF IP cameras, and their
features, refer to the Rapid Eye™ Hybrid HD and Hybrid LT Digital Video Recorders System Administrator
found on the documentation CD that came with your unit.

Communications

Connect a telephone line to the
TELCO port and/or connect an
RJ45 (ethernet) cable to the LAN
port on the DVR
Document 800-07766V4 Rev A
01/2013
Table 1-1 Supported IP Cameras (cont'd)
Software
H.264
support Streaming

V10.1+

V10.1+

V10.1+
Connect the Hybrid LT DVR either to a network, to a telephone line, or both (see
for connection details).
Figure 1-1 Telephone Line (TELCO, North America Only) or Network (LAN)
MONITOR
For more information, see
Rapid Eye™ Hybrid LT DVR Installation Guide
Supported Features
Tamper
MPEG4 Detection (CSD
Streaming Analytics)
 
 
 
VIDEO connector on
analog camera to
VIDEO INPUT on DVR
SPOT
1 2 3 4 5 6 7
VIDEO
INPUTS
TELCO
SERIAL PORT 2
LAN
SERIAL PORT 1 VGA
USB USB
Testing a Dial-Up Connection in the Field
Motion GPIO
Detection
 
 
 
Guide, which can be
8-channel
COMMON CONTROL
SYS FAIL
OUTPUTS SERIAL
SYS GOOD
1 G 2 G G G 3 4
PORT 3
FAULT
Hybrid LT
RELAY
8 28V, 3A
MAX
SERIAL
unit
PORT 4
1 G G G 2 3 4 G 5 G G 6 7 G G 8
ALARM INPUTS
IN
ON/OFF
OUT
115-230V~
50/60 Hz
NOT
5-3A
USED
POWER
on page 40.
PTZ



Figure 1-1
21