Mobility Services Platform - Motorola MC9190-G Integrator Manual

Bootloader Errors (Continued)
Table 5-1
Error Text
Invalid data in HEX file
Exceeded max size
Partition is not valid on
this device
Wrong destination
code
Non-contiguous record
found
Timed Out - No data
Invalid file format
Partition Table not
Valid
Invalid data in file
File cannot be loaded
to this unit
File validation failed

Mobility Services Platform

The MSP 3 Client Software is a set of software components that come pre-installed on the MC9190-G. The MSP 3
Client software consists of the following components:
The RD Client provides support for MSP 3 Staging functionality, provides support for the MSP 3 Legacy Staging
process, and provides support for backward-compatible legacy MSP 2.x Legacy Staging functionality.
The MSP 3 Agent provides MSP 3 Provisioning functionality and Control functionality when used with MSP 3.2
Control Edition.
Refer to the Mobility Services Platform 3.2 User's Guide, p/n 72E-100158-06, for instructions for using the Rapid
Deployment and MSP3 Agent clients.
Error
Number
-25 The HEX file being downloaded contains invalid data. Ensure the file is in
proper HEX file format with valid HEX data.
-26 The download file is too large to fit into the space allocated for it. Either make
the file smaller or increase the space allocated for it by altering the partition
table.
-27 The downloaded file specifies a partition entry that does not exist on the
device. Only download files that are valid for this device, or change the
partition table so that the new file is valid on the device.
-28 A specific partition was chosen from the Bootloader main menu but the file
selected for download was for another partition. Ensure that the partition
selected from the Bootloader main menu matches the file selected for
download.
-30 A HEX file download was attempted but the HEX file is invalid. Ensure the file
is in proper HEX file format.
-31 Bootloader was waiting for data from the source device but timed out before
receiving any. Check the source device connectivity and retry.
-33 The file format is invalid. Only HEX files are supported by Bootloader.
-34 The size of flash memory is different than that described in the partition table.
Retry the download with the correct partition table file.
-35 The .bin or .sig file being downloaded contains invalid data. Ensure the file is
in proper file format.
-38 The file contains valid data that indicates it cannot be loaded onto the device.
-40 The file has either been signed incorrectly, or contains data that indicates
that it cannot be loaded onto the terminal.
Application Deployment for Windows CE 5 - 15
Probable Cause