Cable Adapter Module - Motorola MC9190-G Integrator Manual

2 - 24 MC9190-G Integrator Guide
Tap >
3. Start 9000 Demo
Swipe the magnetic stripe card through the MSR, ensuring the magnetic stripe on the card faces the
4.
MC9190-G. The card may be swiped in either direction, from left to right or from right to left. For best results,
gently press down on the card while swiping to ensure contact with the bottom of the reader.
Magnetic Stripe Card Swiping
Figure 2-21

Cable Adapter Module

This section describes how to set up and use the snap-on CAM with the MC9190-G. The CAM snaps on to the
bottom of the MC9190-G and can be easily removed when not in use.
Communications Port
Cable Adapter Module
Figure 2-22
When attached to the MC9190-G, the CAM:
•
Provides power for operating the MC9190-G, with the appropriate power connection.
NOTE When a MC9190-G with Windows Mobile 6.5 is connected to a host computer through the CAM and an
ActiveSync connection is made, the WLAN and WWAN radios (if applicable) are disabled. This is a Microsoft
security feature to prevent connection to two networks at the same time.
> >
Test Apps MSR 9000
Power Port
or to start the sample application.
MSR Cameo
Latches
Pogo Pin
Pass-through
Connector
Latch Grip