If the host computer or ActiveSync is reset, the port selection may revert to COM1. Open Connection Settings
and re-select the correct USB COM port.
Modem Tab
If using a modem cradle, you can automatically connect to a remote host computer or network or you can choose a
host computer with which you have set up a partnership using ActiveSync. Alternatively, you can connect to your
network and/or launch a specified application on the MC9190-G.
Modem Settings Tab
Figure B-9
•
Launch ActiveSync - Launch ActiveSync when the MC9190-G is placed in a modem cradle.
NOTE Selecting this option automatically deselects Establish network connection and Launch application.
Similarly, selecting Establish network connection or Launch application automatically deselects Launch
ActiveSync.
•
Synchronizes data with the host computer that is directly connected to the remote modem. To
Sync with -
synchronize with a different host computer, check this option and select the host computer in the list.
•
Disconnect after sync -
completed synchronization.
Establish network connection - Establish a network connection when the MC9190-G is placed in a modem
•
cradle. iDockIt uses the modem connection specified in the
Selecting this option automatically deselected
You can check this option in conjunction with
connection, it launches the specified application.
•
Launch application - Launch the selected application when the MC9190-G is placed in a modem cradle.
iDockIt uses the specified command line parameters.
If
Establish network connection
successfully established.
Tap
to open the
1.
Select
Select a File Type in the drop-down list.
2.
Select a folder (as needed).
3.
Use the input panel to specify command line parameters.
4.
Disconnect automatically from the selected host computer when ActiveSync has
Launch ActiveSync
Launch application
is checked the application does not be launched until a connection is
Select Auto-Launch Application
drop-down list.
Connect using
.
. After iDockIt establishes the network
window.
Using iDockIt B - 15