Universal Battery Charger (UBC) Adapter
CAUTION
Ensure that you follow the guidelines for battery safety described in
This section describes how to use the UBC adapter to charge a spare battery.
The UBC can be used with a power supply as a standalone spare battery charger or it can be used with the four
station UBC2000 to provide charging to simultaneously charge up to four spare batteries. For additional
information about the UBC2000, see the UBC 2000 Universal Battery Charger Product Guide (p/n 70-33188-xx)
.
Battery Release
Battery Well
UBC Adapter
Figure 2-26
Inserting and Removing a Battery
Insert the battery into the battery well with the charging contacts facing down (over charging pins) and gently press
down on the battery to ensure proper contact.
To remove the battery, press the battery release and lift battery out of the well.
Battery
UBC Adapter
POWER
READY or STANDBY or FAULT
(Green)
CHARGING
(Solid Yellow)
Accessories 2 - 27
Battery Safety Guidelines on page
(Flashing Yellow)
(Solid Yellow)
8-1.