Harmful Ingredients; Cleaning Instructions; Special Cleaning Notes; Materials Required - Motorola MC9190-G Integrator Manual

Harmful Ingredients

The following chemicals are known to damage the plastics on the MC9190-G and should not come in contact with
the device: ammonia solutions, compounds of amines or ammonia; acetone; ketones; ethers; aromatic and
chlorinated hydrocarbons; acqueous or alcoholic alkaline solutions; ethanolamine; toluene; trichloroethylene;
benzene; carbolic acid and TB-lysoform.

Cleaning Instructions

Do not apply liquid directly to the MC9190-G. Dampen a soft cloth or use pre-moistened wipes. Do not wrap the
device in the cloth or wipe, but gently wipe the unit. Be careful not to let liquid pool around the display window or
other places. Allow the unit to air dry before use.

Special Cleaning Notes

Many vinyl gloves contain phthalate additives, which are often not recommended for medical use and are known to
be harmful to the housing of the MC9190-G. The MC9190-G should not be handled while wearing vinyl gloves
containing phthalates, or before hands are washed to remove contaminant residue after gloves are removed. If
products containing any of the harmful ingredients listed above are used prior to handling the MC9190-G, such as
hand sanitizer that contain ethanolamine, hands must be completely dry before handling the MC9190-G to prevent
damage to the plastics.

Materials Required

•
Alcohol wipes
•
Lens tissue
•
Cotton tipped applicators
•
Isopropyl alcohol
•
Can of compressed air with a tube.

Cleaning the MC9190-G

Housing

Using the alcohol wipes, wipe the housing including keys and in-between keys.

Display

The display can be wiped down with the alcohol wipes, but care should be taken not to allow any pooling of liquid
around the edges of the display. Immediately dry the display with a soft, non-abrasive cloth to prevent streaking.

Scanner Exit Window

Wipe the scanner exit window periodically with a lens tissue or other material suitable for cleaning optical material
such as eyeglasses.

Battery Contacts

Remove the battery from MC9190-G.
1.
Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol.
2.
Maintenance & Troubleshooting 8 - 3