Synchronization With A Windows Mobile 6.5 Device - Motorola MC9190-G Integrator Manual

3 - 6 MC9190-G Integrator Guide
ActiveSync
Connected Window
Figure 3-8
During the first synchronization, information stored on the MC9190-G is copied to the host computer. When the
copy is complete and all data is synchronized, the MC9190-G can be disconnect from the host computer.
NOTE The first synchronization operation must be performed with a local direct connection. To retain partnerships
after a cold boot, capture partnership registry information in a .reg file and save it in the Flash File System,
detailed information is provided in the EMDK Windows CE Help File for the Motorola MC9190-G.
For more information about using ActiveSync or WMDC, start the application on the host computer, then see Help.

Synchronization With a Windows Mobile 6.5 Device

NOTE When the MC9190-G is connected to your computer and a sync connection is made, the Wi-Fi radio (if
applicable) is disabled. This is a Microsoft security feature to prevent connection to two networks at the same
time.
To synchronize with the MC9190-G:
Connect the MC9190-G to your computer using the provided USB cable.
1.
If the Get Connected window does not appear on your computer, select Start > All Programs > Microsoft
2.
ActiveSync or Windows Mobile Device Center.
Click Next.
3.
Select the check box to synchronize with a server running Microsoft Exchange if applicable.
4.
Click Next.
5.
WMDC