Windows Mobile 6.5 Configuration; General Tab - Motorola MC9190-G Integrator Manual

B - 4 MC9190-G Integrator Guide

Windows Mobile 6.5 Configuration

General Tab

Settings on the
General
General Settings Tab
Figure B-1
• Enable iDockIt - Enables iDockIt to control cradle events. When the MC9190-G is placed in a cradle, iDockIt
identifies the type of cradle and perform the activities configured.
• Autostart - Enables iDockIt to start automatically when the MC9190-G is rebooted.
• Display status when cradled - Displays the iDockIt Status tab when the MC9190-G is placed in the cradle.
If Display settings when cradled is selected, the settings tab for the type of cradle detected displays and
then the Status tab displays after the specified time elapses.
Display settings when cradled - Displays the cradle settings tab when the MC9190-G is placed in the
•
cradle.
• Auto connect after x seconds - to automatically make the connection defined on the cradle tab after a
specific delay. The delay provides the opportunity to review or change connection options. During this waiting
period, you can select either Menu > Connect or Menu > Cancel to connect immediately or cancel
automatic connection.
CAUTION If Display settings when cradled is selected and Auto connect after is not selected, iDockIt only
displays the cradle settings tab when the MC9190-G is placed in a cradle and does not attempt to connect
to the network.
• Reconnect delay - Specifies the number of seconds iDockIt waits after a connection is lost before
attempting to reconnect.
• USB Function - When placed into a USB cradle, iDockIt needs to know whether the cradle directly connects
to a host computer or if the cradle connects to a network via an Ethernet cable. If using iDockIt to
synchronize with a host computer using ActiveSync via USB cable or cradle, select RNDIS. If using iDockIt to
connect to a network though an Ethernet cradle, select Serial.
Option are Default, iDockIt, RNDIS and Serial.
• Ports to monitor - If RS232 is check, iDockIt monitors the serial ports for direct or modem connection. If
USB is checked iDockIt monitors USB connections.
tab complement the options set for the cradle.