Cisco Small Business Pro SPA9000 Administration Manual page 44

Basic Administration of the SPA9000
Using the Interactive Voice Response Unit
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com
IVR Action
Set Static IP
Address
Check Network
Mask
Set Network
Mask
Check Static
Gateway IP
Address
Set Static
Gateway IP
Address
Check MAC
Address
manuals search engine
IVR Parameters
Menu
Choice
111 Enter IP address
using numbers on
the telephone key
pad. Use the * (star)
key when entering a
decimal point.
120 None
121 Enter value using
numbers on the
telephone key pad.
Use the * (star) key
when entering a
decimal point.
130 None
131 Enter IP address
using numbers on
the telephone key
pad. Use the * (star)
key when entering a
decimal point.
140 None
2
Notes
DHCP must be disabled
first, or this value is
considered an "Invalid
Option." Hang up the phone
after setting the IP address.
The SPA9000 reboots and
the new address takes
effect. Do not attempt to
use IVR option 110
immediately after changing
the IP address. The old IP
address is reported until
the SPA9000 reboots.
Requires password
IVR announces the current
network mask of SPA.
DHCP must be disabled
first, or this value is
considered an "Invalid
Option."
Requires password
IVR announces the current
gateway IP address of SPA.
DHCP must be "Disable,"
otherwise you hear, "Invalid
Option," if you try to set this
value.
Requires password
IVR announces the MAC
address of SPA in hex
string format.
42