Changing The Music File For The Internal Music Source - Cisco Small Business Pro SPA9000 Administration Manual

Configuring Music on Hold
Using the Internal Music Source for Music On Hold
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com
Start Internet Explorer, and then enter the IP address of the telephone. The
Telephone Configuration page appears in a separate browser window.
Click Admin Login, and then click Advanced.
Click the Ext 1 tab.
Scroll down to the
Enter the following value in the
Click Submit All Changes.
To verify, place a test call to the extension. When the call is answered and put on
hold, the caller should hear the default music file (

Changing the Music File for the Internal Music Source

The following resources are required to change the music file for the internal music
source:
•
TFTP server software
•
The IP address of the administration computer that is connected to the
SPA9000
•
A music source in G.711u format, sampled at 8000 samples/sec, up to 65.5
seconds in length, with no header information
Before you begin, make sure that you have TFTP server software running on your
computer.
Start Internet Explorer, connect to the administration web server, and choose
Admin access with Advanced settings.
Click Voice tab > SIP.
Scroll down to the
Enter the following URL in the Internal Music URL field:
tftp://server_IPaddress:portpath
•
server_IPaddress: The local IP address of the computer you are using as the
TFTP server
•
port: The port number used by the TFTP server (default 69)
manuals search engine
Call Feature Settings
section.
MOH Server
Internal Music Source Parameters
field: imusic
Romance de Amor
section.
6
).
126