Cisco Small Business Pro SPA9000 Administration Manual page 206

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com
RFC 2543 Call Hold
Mark All AVT Packets
SIP TCP Port Min
SIP TCP Port Max
Voice tab > SIP page
SIP Timer Values (sec) section
SIP T1
SIP T2
SIP T4
SIP Timer B
SIP Timer F
manuals search engine
If set to yes, unit will include c=0.0.0.0 syntax in SDP when
sending a SIP re-INVITE to the peer to hold the call. If set to
no, unit will not include the c=0.0.0.0 syntax in the SDP. The
unit will always include a=sendonly syntax in the SDP in
either case.
Default: yes
If set to yes, all AVT tone packets (encoded for redundancy)
have the marker bit set. If set to no, only the first packet has
the marker bit set for each DTMF event.
Default: yes
The lowest TCP port number that can be used for SIP
sessions.
Default: 5060
The highest TCP port number that can be used for SIP
sessions.
Default: 5080
RFC 3261 T1 value (RTT estimate), which can range from 0 to
64 seconds.
Default: .5
RFC 3261 T2 value (maximum retransmit interval for non-
INVITE requests and INVITE responses), which can range
from 0 to 64 seconds.
Default: 4
RFC 3261 T4 value (maximum duration a message remains in
the network), which can range from 0 to 64 seconds.
Default: 5
RFC 3261 INVITE transaction time-out value, which can range
from 0 to 64 seconds.
Default: 32
RFC 3261 Non-INVITE transaction time-out value, which can
range from 0 to 64 seconds.
Default: 32
B
204