SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Downloaded from
www.Manualslib.com
Voice tab > Line page
Dial Plan section
Dial Plan
Voice tab > Line page
NAT Settings section
NAT Mapping Enable
NAT Keep Alive Enable
NAT Keep Alive Msg
NAT Keep Alive Dest
EXT SIP Port
manuals search engine
Dial plan script for this line.
Default: (xx.) The Dial Plan strips off the steering digit prior to
sending the dialed number to the ITSP.
To use externally mapped IP addresses and SIP/RTP ports in
SIP messages, select yes. Otherwise, select no.
Default: no
To send the configured NAT keep alive message periodically,
select yes. Otherwise, select no.
Default: no
Enter the keep alive message that should be sent
periodically to maintain the current NAT mapping. If the value
is $NOTIFY, a NOTIFY message is sent. If the value is
$REGISTER, a REGISTER message without contact is sent.
Default: $NOTIFY
Destination that should receive NAT keep alive messages. If
the value is $PROXY, the messages are sent to the current or
outbound proxy.
Default: $PROXY
Enter the port number of the external port to substitute for the
actual SIP port of the SPA9000 in all outgoing SIP messages.
Default: blank
B
256