Cisco Small Business Pro SPA9000 Administration Manual page 228

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com
SIT3 Tone
SIT4 Tone
MWI Dial Tone
Cfwd Dial Tone
Holding Tone
Conference Tone
Secure Call Indication
Tone
Feature Invocation Tone
Voice tab > Regional page
Distinctive Ring Patterns section
Ring1 Cadence
Ring2 Cadence
manuals search engine
Alternative to the Reorder Tone played when an error occurs
as a caller makes an outbound call. The RSC to trigger this
tone is configurable on the SIP screen.
Default: 914@-16,1371@-16,1777@-16;20(.380/0/1,.380/
0/2,.380/0/3,0/4/0)
This an alternative to the Reorder Tone played when an error
occurs as a caller makes an outbound call. The RSC to trigger
this tone is configurable on the SIP screen.
Default: 985@-16,1371@-16,1777@-16;20(.380/0/1,.274/
0/2,.380/0/3,0/4/0)
Played instead of the Dial Tone when there are unheard
messages in the caller's mailbox.
Default: 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)
Played when all calls are forwarded.
Default: 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)
Informs the local caller that the far end has placed the call on
hold.
Default: 600@-19*(.1/.1/1,.1/.1/1,.1/9.5/1)
Played to all parties when a three-way conference call is in
progress.
Default: 350@-19;20(.1/.1/1,.1/9.7/1)
Played when a call has been successfully switched to secure
mode. It should be played only for a short while (less than 30
seconds) and at a reduced level (less than -19 dBm) so it
does not interfere with the conversation.
Default: 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)
Played when a feature is implemented.
Default: 350@-16;*(.1/.1/1)
Cadence script for distinctive ring 1.
Default: 60(2/4)
Cadence script for distinctive ring 2.
Default: 60(.8/.4,.8/4)
B
226