Table of Contents
Advertisement
PIN Code
Time budget (per day)
Disconnect PSTN Trunk
Enable Offnet Play
Prompt
Enable Waiting Music
After finishing all the settings here, please click OK to save the configuration.
3
.
2
.
4
C
u
s
t
o
m
T
r
u
3
.
2
.
4
C
u
s
t
o
m
T
r
u
This page allows you to use the third party SIP device registered to VigorIPPBX as an
extension but can work as a trunk role. In this way, you can expand your trunk line. For
example, you can connect Vigor3300V+ which inserted a 4xPSTN line card, then you can
expand 4 PSTN trunk lines to your system. Another example is that you can use GSM
gateway as your trunk line via the setting in this page.
Available settings are explained as follows:
Off-Net - If a user needs to do off-net (from VoIP to PSTN)
call, he has to input the PIN code number to do the
authentication for checking if the call is off-net or not.
Select Enable and type the number as a Pin Code.
On-Net - If a user needs to do on-net (from PSTN to VoIP)
call, he has to input the PIN code number to do the
authentication for checking if the call is on-net or not.
Select Enable and type the number as a Pin Code.
Check the box to enable time budget function and configure
the time value.
If run out of budget, you can not make new call for this
trunk; the existing call will be dropped.
Press this button to disconnect PSTN trunk when FXO seize
the line and no way to release it.
Check the box to make the phone playing prompt file when
the call disconnected.
Check the box to enable the function of waiting music.
Then choose the music file (from user prompts) to play in
turn.
Note: This setting only affects on call involving this trunk;
the Music on Hold is system wide, it also works for
extension / extension call.
n
k
n
k
VigorIPPBX 2820 Series User's Guide
46
Advertisement
Table of Contents
