Table of Contents
Advertisement
Log
URL Access Control
Control and Web Feature will be inactive.
Both: Block –The router will block all the packages that
match with the conditions specified in URL Access Control
and Web Feature below. When you choose this setting, both
configuration set in this page for URL Access Control and
Web Feature will be inactive.
Either: URL Access Control First – When all the
packages matching with the conditions specified in URL
Access Control and Web Feature below, such function can
determine the priority for the actions executed. For this one,
the router will process the packages with the conditions set
below for URL first, then Web feature second.
Either: Web Feature First –When all the packages
matching with the conditions specified in URL Access
Control and Web Feature below, such function can
determine the priority for the actions executed. For this one,
the router will process the packages with the conditions set
below for web feature first, then URL second.
None – There is no log file will be recorded for this profile.
Pass – Only the log about Pass will be recorded in Syslog.
Block – Only the log about Block will be recorded in
Syslog.
All – All the actions (Pass and Block) will be recorded in
Syslog.
Enable URL Access Control - Check the box to activate
URL Access Control. Note that the priority for URL
Access Control is higher than Restrict Web Feature. If
the web content match the setting set in URL Access
Control, the router will execute the action specified in this
field and ignore the action specified under Restrict Web
Feature.
Prevent web access from IP address - Check the box to
deny any web surfing activity using IP address, such as
http://202.6.5.2. The reason for this is to prevent someone
dodges the URL Access Control. You must clear your
browser cache first so that the URL content filtering facility
operates properly on a web page that you visited before.
272
VigorIPPBX 2820 Series User's Guide
Advertisement
Table of Contents
