Table of Contents
Advertisement
Enable
Syslog Save to
Router Name
Server IP Address
Destination Port
Enable syslog message
Enable (Alert Setup...)
Send a test e-mail
SMTP Server
Mail To
Return-Path
Authentication
User Name
Password
VigorIPPBX 2820 Series User's Guide
Check Enable to activate function of syslog.
Check Syslog Server to save the log to Syslog directly.
Check USB Disk to save the log to the attached USB
diskette.
Type in the router name provided by ISP.
The IP address of the Syslog server.
Assign a port for the Syslog protocol.
Check the box listed on this web page to send the
corresponding message of firewall, VPN, User Access,
Call, WAN, Router/DSL information to Syslog.
Check Enable to activate function of mail alert.
Make a simple test for the e-mail address specified in this
page. Please assign the mail address first and click this
button to execute a test for verify the mail address is
available or not.
The IP address of the SMTP server.
Assign a mail address for sending mails out.
Assign an e-mail address of another mailbox to accept all
returned messages if fatal problems occur at the recipient
mailbox.
The e-mail address typed here also acts as the Sender
address while Vigor sends out the alert e-mails.
Check this box to activate this function while using e-mail
application.
Type the user name for authentication.
Type the password for authentication.
345
Advertisement
Table of Contents
