Table of Contents
Advertisement
6
.
6
.
3
R
6
.
6
.
3
Remote Authentication Dial-In User Service (RADIUS) is a security authentication
client/server protocol that supports authentication, authorization and accounting, which is
widely used by Internet service providers. It is the most common method of authenticating
and authorizing dial-up and tunneled network users.
The built-in RADIUS client feature enables the router to assist the remote dial-in user or a
wireless station and the RADIUS server in performing mutual authentication. It enables
centralized remote access authentication for network management.
Enable
Server IP Address
Destination Port
Shared Secret
Confirm Shared Secret
VigorIPPBX 2820 Series User's Guide
A
D
I
U
S
R
A
D
I
U
S
Check to enable RADIUS client feature
Enter the IP address of RADIUS server
The UDP port number that the RADIUS server is using.
The default value is 1812, based on RFC 2138.
The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
Re-type the Shared Secret for confirmation.
291
Advertisement
Table of Contents
