Honda EP3 Service Manual page 1133

sRs
DTC Troubleshooting (cont'd)
6. Reconnect the battery negative cable.
7. Erase the DTC memory,
8. Read the DTC.
Is DTC 11-4 indicated?
YES-Go to step 9.
NO Short to power in the driver's side airbag
inflator; replace the driver's side airbag (see page
2 3 - 1 1 5 ) . t
Turn the ignition swilch OFF. Disconnect the
battery negative cable, and wait for 3 minutes.
Disconnect the front passenger's side airbag 2P
connector (see step 4 on page 23-21) and both seat
belt buckle tensioner 4P connectors (see steD 6 on
page 23-221.
9 .
' 1 0 .
23-84
\ . J
1 1 .Disconnect SRS unit connector B (18P) from the
SRS unit (see step 7 on page 23-22l,.
T u r n t h e i g n l t i o n s w i t c h O N ( l l ) .
Check for voltage between the No. 6 terminal of
SRS unit connector B (18P) and body ground, and
between the No. 17 terminal and body ground.
There should be 0.5 V or less.
SRS UNIT CONNECTOR B I18P)
WHT/BLK
ls the voltage as specitied?
YES- Faulty SRS uniU replace the SRS unit (see
page 23-1221.a
NO Short to power in the floor wire harness;
r e p l a c e t h e f l o o r w i r e h a r n e s s . l
' t 2 .
1 3 .
U J