Front Passenger's Airbag Replacement - Honda EP3 Service Manual

sRs
Front Passenger's Airbag Replacement
Removal
1. Disconnectthe battery negative cable, and wait at
least 3 minutes before beginning work,
2. Remove the glove box stops, and lower the glove
box.
3. Disconnect the front passenger's airbag 4P
connector (A) from dashboard wire harness B.
Remove the three mounting nuts (A) from the
bracket. Cover the lid and dashboard with a cloth,
and pry carefully with a screwdriver to lift the front
p a s s e n g e r ' s a i r b a g ( B ) o u t o f t h e d a s h b o a r d .
N O T E : T h e a i r b a g l i d h a s p a w l s o n i t s s i d e w h i c h
4 .
aftach it to the dashboard.
23-114
t r r
Installation
1. Place the new front passenger's airbag (A) into the
dashboard. Tighten the front passenger's airbag
m o u n t i n g n u t s ( B ) .
9.8 N m {1.0 kgf.m,7.2lbf ft}
Connect the front passenger's airbag 4P connector
( A ) t o d a s h b o a r d w i r e h a r n e s s B .
Raise the glove box, and reinstall the stops.
Reconnect the battery negative cable.
After installing the airbag, confirm proper system
o p e r a t i o n ; T u r n t h e i g n i t i o n s w i t c h O N ( l l ) ; t h e S R S
indicator should come on for about 6 seconds and
then go off.
L
4 .