Configuring Networks; Viewing Network Activation Information; Viewing Data Usage - NETGEAR Mingle 3C4C38D7 User Manual

Configuring Networks

Find out how to check your activation status and data usage, and set up your device to connect
to the Virgin Mobile network.

Viewing Network Activation Information

You can check whether network access is activated.
1. Log in to the home page. (See
2. Click About in the top right corner of the page.
3. Check the Activation Date in the WWAN Info section. This is the date that the hotspot
was activated on the Virgin Mobile network.

Viewing Data Usage

You can view an estimate of your data usage on your device's home screen, and on the Mingle
Manager's home page.
Note: The data usage shown is an estimate only and is not accurate for billing purposes.
Note: The session data counter resets automatically each time your device is powered off and
on, and when the mobile broadband network connection disconnects and reconnects (for
example, when going through a tunnel). The plan data counter does not reset automatically, but
you can click Reset to reset it manually.
On the LCD screen
The data usage shown on the home screen is the total used since the counter was last
manually reset.
In the Mingle Manager (http://minglehotspot)
The data usage shown on the home page is the total used since the counter was last manually
reset.
To see detailed data usage, log in to the home page. (See
The Data Usage Session section shows:
●
Amount of data used in the current session.
●
The length of time the connection has been active.
The Data Usage Billing Cycle section shows:
Configuring Networks
Logging In as an Administrator.)
Logging In as an Administrator.)
82