Router > Port Forwarding Tab - NETGEAR Mingle 3C4C38D7 User Manual

Mingle mobile hotspot
Table of Contents

Advertisement

Item
Description
DHCP Server
This field enables (On) or disables (Off) DHCP. See DHCP.
This specifies the starting and ending address of the range of IP
DHCP IP
addresses available for your device to dynamically (that is, not
Range
permanently) assign to computers connected to it. See DHCP.
This is the amount of time, in minutes, a computer can use its assigned
IP address before it is required to renew the lease. After this time is up,
DHCP lease
the computer is automatically assigned a new dynamic IP address. See
time
DHCP.
Enter a number between 2 and 10080.
This specifies how the DNS servers (that the DHCP clients are to
communicate with) are obtained.
DNS mode
Note: The DNS 1 and DNS 2 fields appear only if DNS Mode is
Manual.
Address of a manual DNS server. (This field appears only if DNS Mode
DNS 1
is Manual.)
Address of a manual DNS server. (This field appears only if DNS Mode
DNS 2
is Manual.)
DMZ
DMZ Enabled
Enable / disable demilitarized zone.
If DMZ is enabled, this is the IP address of a single computer used to
DMZ Address
receive all unsolicited incoming connections.
Router > Port Forwarding Tab
Port forwarding lets you forward incoming traffic to specific ports and devices (per their local IP
address) on your network. (Normally, incoming traffic is blocked.)
Mingle Manager (Browser) Interface
§
Manual – The routing hardware assigns DHCP clients the
DNS servers specified in the DNS 1 and DNS 2 fields
Use this option to access a DNS server that provides
customized addressing or if you have a local DNS server on
your network.
§
Auto – The DNS server specified by Virgin Mobile is used.
64

Advertisement

Table of Contents
loading

Table of Contents