Connecting Through Usb - NETGEAR Mingle 3C4C38D7 User Manual

c. Enter your device's PIN.
d. Click Submit.
Your NETGEAR Mingle Mobile Hotspot and the wireless device will communicate and establish
the connection. If no problems are encountered, the message "The device can now access your
hotspot" displays. If your device does not connect, the message "No device was connected ..."
displays – try to connect it manually. (See
Note: If you want to stop the pairing process, click Cancel.

Connecting Through USB

Use the micro-USB cable (included) to connect your device to your computer.
Note: If you'll be using USB to connect to the Internet (and not just for charging your device),
you must install the device driver. (See
Use the micro-USB cable when:
●
You want to charge your device, but you don't want to use the AC charger, or the AC
charger is not available.
●
Your computer does not have Wi-Fi.
●
You want to prevent any other devices from using the hotspot. (See
Tethering Device (Connected Through
Note: You can also block individual devices. See
Devices (Block List) and
To connect your device to your computer:
1. Insert the larger (Type A) end of the micro-USB cable into your computer.
2. Insert the other end of the cable into the micro-USB port on the side of your device.
Your Network Connection
How Do I Connect to
Making a Tethered
Allowing or Denying Computers Access to the Network (MAC
Wi-Fi?)
Connection.)
USB).)
Displaying and Blocking Currently Connected
Disable Wi-Fi When
Filter).
26