Your Network Connection; Launching Your Network Connection; Setting Up A Guest Wi-Fi Network; Turning The Guest Wi-Fi Network On - NETGEAR Mingle 3C4C38D7 User Manual

Your Network Connection

Find out how to launch, share, and end your network connection.

Launching Your Network Connection

After your device powers on and boots up, a connection to the best available network is
launched automatically.
Your device will remain connected at all times, unless:
●
You are out of signal range or the signal is blocked (in a tunnel, etc.).
Note: Even though your device is connected, you are only billed when data is sent or received.
See If the Connection is "Always On," Am I Always Being
See also:
●
Internet Connection Information
●
Mobile Broadband Information and Settings
●
Signal Information

Setting up a Guest Wi-Fi Network

Your NETGEAR Mingle Mobile Hotspot lets you create a separate Guest Wi-Fi network that you
can share with temporary users.
Devices on the Guest Wi-Fi network:
●
Cannot access devices that are on the Main Wi-Fi network (such as printers or other
computers)
●
Cannot use the Mingle Manager to change any device settings

Turning the Guest Wi-Fi Network On

You can turn on the Guest Wi-Fi network from your device's Guest Wi-Fi screen, or from the
Mingle Manager's Wi-Fi page.
On the LCD screen
1. From the homescreen, click the power button once to display the next screen. Repeat
until you reach the Guest Wi-Fi screen.
2. Click the power button twice to turn on Guest Wi-Fi.
Your Network Connection
Billed?.
22