Enable / Disable The Block List; Displaying And Blocking Currently Connected Devices (Block List); View And Unblock Devices (Block List) - NETGEAR Mingle 3C4C38D7 User Manual

Enable / Disable the Block List

You can enable your NETGEAR Mingle Mobile Hotspot's block list on the Mingle Manager's
Wi-Fi > MAC Filter page. This lets you identify devices that should not be allowed to access
your Wi-Fi networks.
In the Mingle Manager (http://minglehotspot)
1. Log in to the home page. (See
2. Click Wi-Fi > MAC Filter.
3. Beside MAC Filter Mode, select Black list to block devices, or select None to stop
blocking devices.
4. Click Submit.

Displaying and Blocking Currently Connected Devices (Block List)

To detect a potential intruder, you may want to display a list of the Wi-Fi-enabled devices that
are currently connected to your NETGEAR Mingle Mobile Hotspot. You can display this list on
the Mingle Manager's home page.
If you want to stop a device from connecting to your network, you can add it to your device's
block list. The blocked device will not be able to connect again until you choose to unblock it.
(See View and Unblock Devices (Block
Note: You have to enable the block list before you can block devices from using your Wi-Fi
networks. (See Enable / Disable the Block
In the Mingle Manager (http://minglehotspot)
1. Log in to the home page. (See
The Connected Devices section of the home page shows a list of the devices
connected to your Main and Guest Wi-Fi networks.
2. If you want to block a listed device, click the device name. The device's IP address and
MAC address display.
3. Click Block Device.
4. Click Block Device again.

View and Unblock Devices (Block List)

You can view a list of devices that you have blocked (see
Connected Devices (Block List)
the Mingle Manager's Wi-Fi > MAC Filter page.
Configuring the Wi-Fi Network
Logging In as an
List).)
List.)
Logging In as an
from connecting to your NETGEAR Mingle Mobile Hotspot on
Administrator.)
Administrator.)
Displaying and Blocking Currently
94