Chapter 2 Placing Your AirStation
1
Use a Ethernet cable to connect LAN port 1 of the AirStation to a PoE switch or other device
that supports PoE.
Note:
Be sure that the cable connecting the AirStation and power sourcing equipment is an enhanced
Category 5 or higher 4-pair cable.
Connect ITE to PoE networks without routing to the outside plant.
2
Turn on the AirStation power.
3
Make sure that the power LED is on.
If the power LED does not turn on after several minutes, make sure that the LAN cable is
connected correctly, the AirStation is turned on, and the power source is turned on.
Connecting the AC Adapter
If PoE is not available, connect the AC adapter to the AirStation.
1
Use the supplied AC adapter to connect the equipment to a UPS, power strip, or outlet.
2
Turn on the AirStation.
3
Make sure that the power LED is on.
If the power LED does not turn on after several minutes, make sure that the AC adapter is
plugged in correctly and that the AirStation is turned on.
AirStation
PoE Switch
- 9 -