Appendix B - Tcp/Ip Settings; Windows 8 - Buffalo WAPS-APG600H User Manual

Appendix B - TCP/IP Settings

Windows 8

To configure TCP/IP in Windows 8, follow the procedure below.
1
Open Control Panel.
2
Click Network and Internet.
3
Click Network and Sharing Center.
4
Click Change adapter settings on the left side menu.
5
Right-click on the network adapter, then click Properties.
6
If the User Account Control screen opens, click Yes or Continue.
7
Select Internet Protocol Version 4 (TCP/IPv4) then click Properties.
8
To have DHCP set your IP address settings automatically, check Obtain an IP address
automatically and Obtain DNS server address automatically.
Alternately, you can configure the settings manually. Example:
If the router's IP address is 192.168.11.1,
IP address
Subnet mask
Default gateway
Preferred DNS server
Alternate DNS server
9
Click OK.
192.168.11.80
255.255.255.0
192.168.11.1
192.168.11.1
blank
- 91 -