Buffalo WAPS-APG600H User Manual page 39

Chapter 3 Configuration
Parameter
Multicast Rate
Tx Power
Beacon Interval
Station Keepalive
Meaning
This setting controls the communication speed of multicast
packets.
When set to Auto (BRS), the communication speed is determined
automatically for maximizing the coverage distance.
802.11g
Auto, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, or 54 Mbps can be selected.
802.11a
Auto, 6, 9, 12, 18, 24, 36, 48, or 54 Mbps can be selected.
Because the multicast communication speed and coverage
distance are inversely proportional to each other, this setting is
recommended only when necessary.
Sets the signal transmission output when the AirStation performs
wireless transmission.
Sets the interval for sending beacons.
If the beacon send interval is long, wireless communication
performance may be improved, but the capability of the wireless
device to detect the AirStation will be reduced.
Normally, usage at the default value is recommended.
Specifies the interval for confirming whether the AirStation is
connected to the connected wireless device.
Normally, this setting can be used at the default value (60), but in
some wireless devices, setting a larger value enables more stable
communication and reduced power consumption.
When set to 0, the connection is not confirmed by the AirStation,
but in environments where a large unspecified number of wireless
devices are connected, a new wireless device may be unable to
make a connection.
- 38 -