Buffalo WAPS-APG600H User Manual page 36

Chapter 3 Configuration
Parameter
Check Auto-Channel
Channel Bandwidth
BSS Basic Rate Set
Meaning
Sets the interval for changing the channel when auto-channel is
enabled.
When a checkmark is inserted for "Change channel if STA is
connected", the channel is changed even if the client is connected
to the AirStation.
Specifies the channel bandwidth.
Sets the communication speed of the management and control
communication frame for the AirStation and wireless device.
The following speeds are available in the 802.11g standards.
· 1, 2 Mbps
· 1, 2, 5.5, 11 Mbps (Default setting)
· 1, 2, 5.5, 6, 11, 12, 24 Mbps
· all (1, 2, 5.5, 11, 12, 18, 24, 36, 48, 54 Mbps)
The following speeds are available in the 802.11a standards.
· 6, 12, 24 Mbps (Default setting)
· all (6, 9, 12, 18, 24, 36, 48, 54 Mbps)
If communication cannot be performed when set to "all", return to
the default setting.
- 35 -