Buffalo WAPS-APG600H User Manual page 7

Chapter 1 Product Overview
3 blinks :
*2
4 blinks :
*2
5 blinks:
9 blinks :
*2
Continuously
blinking :
*1
*1 Never unplug the AC adapter while the Diag LED is blinking continuously.
*2 Turn off AirStation first, wait for a few seconds, then turn it back on.
3
5 GHz LED (Blue)
On:
Randomly blinking: 5 GHz wireless LAN is transmitting.
2 blinks:
Continuously
blinking:
Note: This LED is off when "LED Setting" is set to off. The default setting is off (Disable). Enable the wireless
function by referring to "Wireless & Encryption" (page15).
4
2.4 GHz LED (Green)
On:
Randomly blinking: 2.4 GHz wireless LAN is transmitting.
2 blinks:
Continuously
blinking:
Note: This LED is off when "LED Setting" is set to off. The default setting is off (Disable). Enable the wireless
function by referring to "Wireless & Encryption" (page15).
5
LAN LED (Green)
On:
Blinking:
6
Antenna Connector Screw on the included antennas here.
Wired Ethernet LAN error.
Wireless LAN error.
USB error.
System error.
Updating firmware, saving settings, or initializing settings.
5 GHz wireless LAN is enabled.
AirStation is waiting for an AOSS or WPS security key.
AOSS/WPS error; failed to exchange security keys.
2.4 GHz wireless LAN is enabled.
AirStation is waiting for an AOSS or WPS security key.
AOSS/WPS error; failed to exchange security keys.
An Ethernet device is connected.
An Ethernet device is communicating.
Note: The supplied antenna supports both the 2.4 GHz and 5 GHz bands.
- 6 -