Connecting The Ac Adapter - Buffalo WAPS-APG600H User Manual

1
Use a Ethernet cable to connect LAN port 1 of the AirStation to a PoE switch or other device that supports PoE.
Note: Be sure that the cable connecting the AirStation and power sourcing equipment is an enhanced category 5 or
higher 4-pair cable.
Connect ITE to PoE networks without routing to the outside plant.
2
Turn on the AirStation power.
3
Make sure that the power LED is on.
If the power LED does not turn on after several minutes, make sure that the LAN cable is connected correctly, the
AirStation is turned on, and the power source is turned on.

Connecting the AC Adapter

If PoE is not available, connect the AC adapter to the AirStation.
1
Use the supplied AC adapter to connect the equipment to a UPS, power strip, or outlet.
2
Turn on the AirStation.
3
Make sure that the power LED is on.
If the power LED does not turn on after several minutes, make sure that the AC adapter is plugged in correctly and
that the AirStation is turned on.
11