Windows Vista - Buffalo WAPS-APG600H User Manual

Appendix B TCP/IP Settings

Windows Vista

To configure TCP/IP in Windows Vista, follow the procedure below.
1
Open Control Panel.
2
Click Network and Sharing Center.
3
Click Manage network connections on the left side menu.
4
Right-click on the network adapter, then click Properties.
5
If the User Account Control screen opens, click Yes or Continue.
6
Select Internet Protocol Version 4 (TCP/IPv4), then click Properties.
7
To have DHCP set your IP address settings automatically, check Obtain an IP address
automatically and Obtain DNS server address automatically.
Alternately, you can configure the settings manually. Example:
If the router's IP address is 192.168.11.1,
IP address
Subnet mask
Default gateway
Preferred DNS server
Alternate DNS server
8
Click Close.
192.168.11.80
255.255.255.0
192.168.11.1
192.168.11.1
blank
- 93 -