Buffalo WAPS-APG600H User Manual page 43

Chapter 3 Configuration
Security Mode: WEP
Parameter
Key Length
Key Type
Default key
Encryption Key 1
Encryption Key 2
Encryption Key 3
Encryption Key 4
Security Mode: IEEE802.1x/EAP
Parameter
Key Length
Security Mode: WPA-PSK
Parameter
WPA Type
Meaning
Select an encryption key between 64-bits or 128-bits.
This is used to select the encryption key format.
ASCII (5 characters)
Enter a string of 5 single-byte alphanumeric characters (key length:
64- bit) or 13 characters (key length: 128-bit).
HEX (10 characters)
Enter a 10-digit hexadecimal number (key length: 64-bit) or 26-digit
number (key length: 128-bit).
The encryption key that is used can be selected from Key 1 to Key 4.
The key is entered in the format selected in "Key Type".
Meaning
The encryption key length is selected from 64-bits or 128-bits.
Meaning
WPA/WPA2 mixed mode-PSK
Wireless device authentication by both WPA-PSK and WPA2-PSK
can be performed simultaneously.
WPA2 Only
This performs wireless LAN device authentication compliant with
WPA2 (IEEE802.11i).
WPA Only
This performs wireless LAN device authentication compliant with
WPA (Wi-Fi Protected Access).
- 42 -