Chapter 5: Using The Phone Adapter's Web-Based Utility; Overview - Linksys VONAGE PAP2 Ver. 2 Installation And Troubleshooting Manual

Chapter 5: Using the Phone Adapter's Web-based Utility

Overview

NOTE: The Phone Adapter has been pre-configured for Vonage service, and you do not need to
change any settings. If you do wish to make changes, follow the instructions in this chapter.
This chapter will describe each web page on the Utility and each page's key functions. The Utility can be
accessed via your web browser through use of a computer on your network.
There are four main tabs: Setup, Administration, Status, and Voice. Additional tabs will be available after you
click the Administration tab.
Setup
Enter the network settings on this screen.
Administration
• Management. On this screen, alter the Phone Adapter's user name, password, and remote access settings.
You can also use this screen to back up or restore the Phone Adapter's configuration file.
• Log. If you want to save activity logs, click this tab.
• Factory Defaults. If you want to reset the Phone Adapter to its adapter factory default settings, then use this
screen. If you want to reset the Phone Adapter to its voice factory default settings, then you will need a
password available only from Vonage. Contact your provider for more information.
Chapter 5: Using the Phone Adapter's Web-based Utility
Overview
Phone Adapter with 2 Ports for Voice-over-IP
15