The Administration Tab - Factory Defaults; Figure 5-6: Administration Tab - Factory Defaults - Linksys VONAGE PAP2 Ver. 2 Installation And Troubleshooting Manual

Phone Adapter with 2 Ports for Voice-over-IP

The Administration Tab - Factory Defaults

The Factory Defaults screen allows you to reset the Phone Adapter to its adapter factory defaults. If you want to
reset the Phone Adapter to its voice factory defaults, then you need a password available only from Vonage.
Contact your provider for more information.
Factory Defaults
Restore Adapter Factory Defaults. If you wish to reset the Phone Adapter to its adapter factory defaults, click
the Yes radio button and then the Save Settings button. Then follow the on-screen instructions.
NOTE: Any custom settings you have saved will be lost when the default settings are restored, so
before you restore the adapter factory defaults, write down any settings you may need later.
Restore Voice Factory Defaults. If you click the Yes radio button and then the Save Settings button, you will
see a screen asking for a username and password. Enter the username and password provided by Vonage, and
follow the on-screen instructions.
When you have finished making changes to this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes.
22
Figure 5-6: Administration Tab -
Factory Defaults
Chapter 5: Using the Phone Adapter's Web-based Utility
The Administration Tab - Factory Defaults