The Front Panel; Figure 2-2: Front Panel - Linksys VONAGE PAP2 Ver. 2 Installation And Troubleshooting Manual

Phone Adapter with 2 Ports for Voice-over-IP

The Front Panel

The Phone Adapter's LEDs are located on the front panel.

Figure 2-2: Front Panel

PHONE 1/2 LED Green. The PHONE 1 LED is solidly lit when a telephone or fax machine has a registered
connection to Vonage through the corresponding port. (The connection is registered if your
Vonage phone service account is active.) It flashes when the phone is being used or an
incoming call has been detected.
INTERNET LED Green. The INTERNET LED lights up when the Phone Adapter is connected to your network
through the Internet port. It flashes when there is data being sent or received.
Power LED Green/Red. The power LED lights up when the Phone Adapter is powered on and ready. It
flashes green when the Phone Adapter is booting up, undergoing a self-test, or performing
a firmware upgrade. The LED lights up red when the Phone Adapter has failed its self-test
or is malfunctioning. Refer to "Appendix A: Troubleshooting" for more information.
4
IMPORTANT: The PHONE and
power LEDs must be solid
green to make phone calls.
Chapter 2: Getting to Know the Phone Adapter
The Front Panel