Linksys VONAGE PAP2 Ver. 2 Installation And Troubleshooting Manual page 44

Phone Adapter with 2 Ports for Voice-over-IP
7. Enter the IP address of the Phone Adapter. For example, if the Phone Adapter's IP address is
192.168.1.100, you would enter 100 in the field provided.
8. Repeat steps 5-7 until you have entered all four port ranges for the Phone Adapter.
Application Start and End
Internet phone 1 5060 to 5061
Internet phone 2 53 to 53
Internet phone 3 69 to 69
Internet phone 4 10000 to 20000
9. Check the Enable option for the port services you want to use.
10. When you have completed the configuration, click the Save Settings button.
7. The Power LED does not light up or lights up red.
Go through this checklist until your problem is solved:
• Unplug the power adapter from the Phone Adapter. Wait five seconds. Then plug the power adapter into
the Phone Adapter again.
• You may be using the wrong power adapter. Make sure the power adapter you are using is the one
included with the Phone Adapter.
36
Protocol IP Address
UDP (IP address of
Phone Adapter)
UDP (IP address of
Phone Adapter)
UDP (IP address of
Phone Adapter)
UDP (IP address of
Phone Adapter)
Enable
X
X
X
X
Common Problems and Solutions
Appendix A: Troubleshooting