Making The Terminal Discoverable; Enabling The Terminal To Receive Incoming Beams; Selecting Com Ports - Honeywell Dolphin 70e Black User Manual

Making the Terminal Discoverable

By default, the Dolphin terminal is not discoverable, which means that the terminal will not be found by
other Bluetooth devices.
1. To make the terminal discoverable, touch > Settings > Bluetooth .
Note: If you are in the Dolphin Wireless Manager, touch Menu > Bluetooth Settings.
2. Touch Mode on the Horizontal scroll.
3. Select "Make this device visible to other devices" and touch OK.

Enabling the Terminal to Receive Incoming Beams

By default, the Dolphin 70e Black terminal is not configured to receive incoming beams from other
devices attempting file transfers via the Beam File command. Before initiating a file transfer from another
device follow the steps below to enable Beam reception on your Dolphin terminal.
1. Touch > Settings > Connections > Beam .
2. Select "Receive all incoming beams."
3. Touch OK.

Selecting COM Ports

For more information on available COM ports, see Dolphin 70e Black COM Port Assignment Table on
page 7-14.
9 - 6