Taking An Image; Uploading Images - Honeywell Dolphin 70e Black User Manual

Taking an Image

The following steps are basic guidelines for taking images:
1. Touch > Demos > Imaging Demo
2. Point the Dolphin terminal at the object. To preview the image, press and hold the Scan button.
Note: The general notification LED above the touch screen illuminates red while the Scan button is pressed.
3. Adjust the terminal's position until the object appears on the touch screen the way you want it to
appear in the image.
4. Release the Scan button to capture the image.
5. Touch File on the Tile bar, then select Save or Save As.
Note: Unless otherwise specified, the image is saved to the \My Device\My Documents folder.
Enabling the Aimer
By default, the Aiming Beam (see page 4-3) is turned off in the Imaging Demo application. To enable the
aiming beam for image capture:
1. Touch File at the bottom of the Imaging Demo screen.
2. Select Setup from the menu, then touch Aimer.
Note: If an option is enabled, a check mark appears next to the name.
3. The aiming beam is now enabled for imaging.

Uploading Images

Image files can be uploaded to a host workstation using Microsoft ActiveSync or Windows Mobile Device
Center and a Dolphin communication peripheral. For additional information see
Synchronizing the Terminal and Workstation
.
on page 7-9.
Connecting and
4 - 5