Installing Additional Software; Adding Programs Using Activesync Or Windows Mobile Device Center - Honeywell Dolphin 70e Black User Manual

Exploring the Terminal from the Workstation
ActiveSync
1. Open the main ActiveSync window on the workstation.
2. Click Explore. This opens the Mobile Device folder for the terminal in Windows Explorer.
3. The Dolphin terminal is now treated as a mass storage device, and transferring files is as simple as
dragging and dropping or copying and pasting.
Windows Mobile Device Center
1. Open WMDC on the workstation.
2. Click File Management. > Browse the content of your device. This opens Windows Explorer
where you can access the folder for the terminal.
3. The Dolphin terminal is now treated as a mass storage device, and transferring files is as simple as
dragging and dropping or copying and pasting.

Installing Additional Software

Dolphin terminals ship with the operating system, radio drivers, and custom Honeywell software already
installed. These are the default programs that install when your terminal first boots up. You can install
additional software programs to the terminal provided the following parameters are met:
• The terminal has enough memory to store and run the software program.
• The terminal processor meets the minimum requirements to run the software program.
• The software program was created for a Windows Embedded Handheld 6.5 device.
• The software program file has an EXE, CAB, or DLL extension.
Note: To verify the terminal processor, touch
Version screen.
To install additional software, you can use the communication options described in this chapter.
• Adding Programs Using ActiveSync or Windows Mobile Device
• Adding Programs Using the

Adding Programs Using ActiveSync or Windows Mobile Device Center

Generally, software for Windows Embedded Handheld devices must be installed to the host workstation
first, then transferred to the Dolphin terminal.
Note: An active Microsoft ActiveSync or WMDC connection between a host workstation and the Dolphin terminal is
required to add programs. For additional information, see
Workstation on page
1. Read any installation instructions, Read Me files, or documentation that comes with the program.
2. Download the program to the workstation from either the Internet or the software installation CD.
You may see a single *.exe or setup.exe file, a *.cab file, or a *.dll file.
Note: There may be several versions of files for different device types and processors. Select the file that
matches the terminal processor.
> Settings > System > About. The processor is displayed on the
Internet, see page 7-13.
7-9.
Center.
Connecting and Synchronizing the Terminal and
7 - 11