Battery; Replacement Battery Specifications; Charging Options - Honeywell Dolphin 70e Black User Manual

Battery

The primary power source for the Dolphin terminal is the 3.7V Li-ion rechargeable battery located under
the battery door on the back panel of the device. Honeywell recommends, you keep the battery in the
terminal charged at all times to help prevent data loss. Letting the battery become fully discharged
causes the terminal to lose all data in RAM.
Note: All data in RAM is cleared when the battery is removed. Always place the terminal in Suspend mode before
removing the battery to ensure any changes made are saved to the flash memory.

Replacement Battery Specifications

Dolphin 70e Black models equipped with a battery door lock are designed for use with battery part
numbers BAT-STANDARD-02 (Li-ion 3.7V, 6.179 watt hour) and BAT-EXTENDED-02
(Li-ion 3.7V, 12.358 watt hour) manufactured for Honeywell International Inc. See page
replacement instructions.
Back panel of the terminal
with standard battery door
shown.
Dolphin 70e Black models not equipped with a battery door lock are designed for use with battery
part numbers BAT-STANDARD-01 (Li-ion 3.7V, 6.179 watt hour) and BAT-EXTENDED-01
(Li-ion 3.7V, 12.358 watt hour) manufactured for Honeywell International Inc. See page
replacement instructions.
Back panel of the terminal
with standard battery door
shown.
Important Battery and Battery Door Replacement Guidelines
Follow the guidelines listed below when ordering batteries and/or battery doors.
• Size (e.g., standard or extended): The battery and battery door must be the same size.
• Type (e.g., locking or non-locking): The battery and battery door must match your terminal type.
See details above.
• Near Field Communication (NFC) requirements: Use only NFC compatible battery doors with
NFC equipped Dolphin models identified with a letter N at the end of the model number (e.g.,
70exxN).
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.

Charging Options

Dolphin terminals ship with the battery significantly discharged of power. Before using a Dolphin
terminal for the first time, charge the battery with a Dolphin charging device for a minimum of 4 hours
for the standard battery and 6 hours for the extended battery. When using the 70e-USB Charge/
Communication cable to charge from a 500mA USB port on a host device, charge the battery for a
minimum of 6 hours for the standard battery and 8 hours for the extended battery.
3 - 12
2-15 for battery
Battery Door Lock
2-16 for battery