Honeywell Dolphin 70e Black User Manual page 42

Home Button
By default, the Home button returns you to the Home screen,
is one of six programmable buttons on the Dolphin 70e Black. You can reassign the button to
launch applications or execute commands. For additional information, see
Assignments
Right Scan/Image Button
By default, the right button triggers the scanner/imager. You can reassign the button to launch
applications or execute commands. For additional information, see
Assignments
Scan Button
The Scan button is centrally located for easy access with the right or left hand. By default, the
button activates the scanner/imager. You can reassign the button to launch applications or
execute commands.
Send Button
Answers a phone call or initiates a phone call. See
Touch Panel Display
The color 4.3 inch (liquid crystal display (LCD) touch panel is covered with an industrial,
protective lens for greater durability. The wide video graphic array (WVGA) display resolution
is 800 X 480. The touch panel can be activated with a finger or with the optional stylus.
The touch panel backlight illuminates when the screen is touched. For more information, see
Backlight on page
USB Door/Micro USB Port
The Micro USB port is located under the protective USB door on the right side of the terminal.
To access the micro USB port, gently lift the top edge of the door closest to the digital
microphone, and then rotate 90° counterclockwise.
The micro USB port in conjunction with the USB Charge/Communication Cable (model 70e-
USB) powers the terminal, charges the main battery, and facilitates communication. The micro
USB port supports low, full, and high-speed USB v2.0 client communication with a maximum
rate of 480 Mbps.
For additional information, see
ADAPTERKIT)
on page 7-9.
WAN Notification LED
The light emitting diode (LED) located above and to the left of the LCD display flashes and
illuminates for WAN notifications (e.g., a missed call, new voice mail, SMS message, or email).
The notification LED flashes when the terminal is active or stays on steady when the terminal
is in Suspend mode.
3 - 6
on page 6-5.
on page 6-5.
6-16.
Using the USB Charge/Communication Cable (Model 70e-USB
on page 2-4 and Connecting and Synchronizing the Terminal and Workstation
see page 2-6. The Home button
Changing Button
Voice Communication
Changing Button
on page 8-4.