Advertisement
Dust bag
I
The use-of the dust bag makes cutting
operations clean and dust collections easy.
To attach the dust bag, fit the bags entry
port over the dust nozzle.
When the dust bag is about half full,
remove the dust bag from the tool and pull
the fastener out. Empty the dust bag of its
contents, tapping it lightly so as to remove
particles adhering to the insides which
might hamper further collection.
Switch action
To prevent the switch lever from being
accidentally pulled, a lock-off button is pro-
vided.
To
start the tool, press in the lock-off but-
ton and pull the switch lever. Release the
switch lever to stop.
Dust nozzle
@
I
Dust
bag
-
Lock-off
button
Switch lever
I
I
CAUTION :
*Before plugging in the tool, always check to see that the switch lever actuates properly
*When not using the tool, remove the lock-off button and store it in a secure place. This
*Do not pull the switch lever hard without pressing in the lock-off button. This can cause
and returns to the "OFF" position when released.
prevents unauthorized operation.
breakage of the switch.
9
Advertisement
