Advertisement
*Loosen the lever and tilt the
Saw
blade
to set the bevel angle. Be sure to
retighten the lever firmly to secure the
selected bevel angle safely. Secure the
workpiece. Switch on the tool and wait
until the blade attains full speed. Then
gently lower the handle to the fully
lowered position while applying pres-
sure in the direction of the arrow (in
parallel with the blade). When the cut is
completed, switch off the tool and WAIT
UNTIL THE BLADE HAS COME TO A
COMPLETE STOP before returning the
blade to its fully elevated position.
Sub fence-,
Apply pressure in the
direction
of thearrow (in
Parallel with the blade)
1s
Advertisement
