Advertisement
Carrying tool
When carrying the tool, lower the handle
fully
and press the stopper pin to lock the
handle in the lowered position. Secure the
turn base by means of the knob. Carry the
tool by holding both side of the tool base.
WARNING:
Be sure that the tool is unplugged first
Socket wrench
The socket wrench is stored as shown in
the figure. When using the socket wrench,
pull it out of the wrench holder. After using
the socket wrench, return it to the wrench
holder
Bench mounting miter saw
This tool should be bolted with four bolts to
a level and stable surface using the bolt
holes provided in the tool's base. This will
help prevent tipping and possible injury.
Removing or installing saw blade
CAUTION:
Always be sure that the tool is switched off
and unplugged before removing or installing
the blade.
To remove the blade, use the socket
wrench to loosen the hex bolt holding the
center cover by turning it more than three
turns counterclockwise. Raise the safety
cover and center cover.
I
~
I
7
Advertisement
