Advertisement
5.
Cutting aluminum extrusion
When securing aluminum extrusions,
use spacer blocks or pieces of scrap as
shown in the figure to prevent deforma-
tion of the aluminum. Use a cutting
lubricant when cutting the aluminum
extrusion to prevent build-up of the alu-
minum material on the blade.
n
Aluminum extrusion
Spacer block
I '
CAUTION:
Never attempt to cut thick or round aluminum extrusions. Thick aluminum extrusions
may come loose during operation and round aluminum extrusion cannot be secured
firmly with this tool.
6. Wood facing
Use of wood facing helps to assure splinter-free cuts in workiieces. Attach a wood fac-
ing to the guide fence using the holes in the guide fence.
CAUTION:
*Use straight wood of even thickness as the wood facing.
*See the figure below concerning the dimensions for a suggested wood facing.
Over 10
m m
1318")
Over
580 m m
I22-314"l
m
98 m m
13-7/8")
105"
115"
115"
105"
Hole
(4-1/8"1
(4-1/2"1 14-1/2'')
(4-1/8"1
I
Center of wood facing
18
Advertisement
