Service Points; Fuel Hose Clamps Removal; Hose Clamps Installation; Fuel Hose Disconnection - Yamaha VX110 Sport Service Manual

FUEL
1
THROTTLE BODY ASSEMBLY AND INTAKE
MANIFOLD
a

SERVICE POINTS

Fuel hose clamps removal

1. Remove:
• Fuel hose clamps
CAUTION:
If the fuel hose clamps are removed with-
out cutting the joint first, the fuel hose will
be damaged.

Hose clamps installation

1. Install:
• Fuel hose clamps
WARNING
Do not reuse the fuel hose clamps, always
replace them with new ones.
NOTE:
Crimp the fuel hose clamps properly to
securely fasten them.

Fuel hose disconnection

WARNING
Before disconnecting the hose, remove the
fuel tank filler cap to reduce any pressure
inside the fuel tank, and then disconnect
the battery negative lead to cut off the elec-
tric current to the electrical systems.
1. Wrap the quick connector with a cloth, and
then rotate the quick connector tab 1 to
the stopper position a.
WARNING
If the quick connector is removed sud-
denly, pressurized fuel could spray out. To
gradually release the fuel pressure, be sure
to remove the quick connector slowly.
4-12
E