Service Points; Cooling Water Pilot Outlet Installation; Grommet Installation; Ventilation Hose Assembly Installation - Yamaha VX110 Sport Service Manual

HULL
HOOD
HOSES
3
2
1
1
a
2

SERVICE POINTS

Cooling water pilot outlet installation

1. Install:
• Cooling water pilot outlet 1
• Seal 2
• Nut 3
NOTE:
• When installing the cooling water pilot outlet,
face the discharge hole toward the stern and
downward at a 30° angle from the horizontal
line as shown in the illustration.
• Tighten the nut while holding the cooling
water pilot outlet in place.

Grommet installation

1. Install:
• Ventilation hose 1
• Grommet 2
NOTE:
Install the grommet on the ventilation hose,
making sure that the end of the hose protrudes
the specified length a from the groove around
the outside of the grommet as shown in the
illustration.
Specified length a:
30–40 mm (1.18–1.57 in)

Ventilation hose assembly installation

1. Install:
• Ventilation hose assembly
NOTE:
When installing the ventilation hose assembly,
make sure that the grommet is properly seated
in the hole in the inner hull as shown in the
illustration.
8-19
E