Drive Shaft Installation - Yamaha VX110 Sport Service Manual

JET
PUMP
IMPELLER DUCT AND DRIVE SHAFT

Drive shaft installation

1. Install:
• Oil seals
Driver handle—large:
YB-06071
Driver rod LS:
90890-06606
Outer race installer—forward
gear:
YB-06085
Ball bearing attachment:
90890-06634
Distance a:
4.6 ± 0.2 mm (0.18 ± 0.01 in)
2. Install:
• Rear bearing
NOTE:
• Install the rear bearing onto the drive shaft
using a press.
• Press the rear bearing using a pipe that is
more than 140 mm (5.51 in) long and that
has an inner diameter of 26 mm (1.02 in).
3. Install:
• Spacer
4. Add:
• EPNOC grease AP #0
(between the drive shaft and spacer)
Quantity:
20 g (0.7 oz)
6-12
E