Intake Assembly Installation - Yamaha VX110 Sport Service Manual

FUEL
1
a
2
8 mm (0.31 in)
THROTTLE BODY ASSEMBLY AND INTAKE
MANIFOLD
a
1
6 mm (0.24 in)

Intake assembly installation

1. Install:
• Intake screw clamp
• Intake manifold joint
• Intake assembly
NOTE:
• Install the intake screw clamp in the direction
shown in the illustration, making sure to align
the indentation in the clamp with the projec-
tion a on the intake manifold joint.
• Tighten the clamp screw until both ends of
the intake screw clamp contact the spacer 1
around the screw.
2. Install:
• Fuel hose 2 (fuel rail side)
• Fuel hose clamps
WARNING
Do not reuse the fuel hose clamps, always
replace them with new ones.
NOTE:
• Install the fuel hose with the white mark a
facing up.
• Install the fuel hose clamps at the locations
shown in the illustration, and then crimp
them to securely fasten them.
4-16
E